Have you ever looked at your UTV and thought, that could be a lot better? With our quality products, not only will your UTV look sharp, and sleek, it'll be more durable and able to take a beating.

 

 

Xtreme Duty

 .+

.+

Xtreme Duty 1000xp full kit. 1 1/16" x .250 a arm tubing with added brace tube that can also have swaybar tabs added to. Extra sheet metal gusset on the bottom of the upper a arm. Lower a arm is fitted with a longer 3/16" thick gusset plate. 
Radius rods are 1 1/16" HEX solid that has been run through a heat treat process. Only weighs 1lbs more per ft than our current radius rods. All new HD stainless bushings in all joints. Swaybar links made from the same HEX material.
Trailing arms have a UHMW rock slide fitted to the underneath and we will stock these slider replacements.
Overall we just built off our current model parts but went over the top for strength and durability. These parts will carry our LIFETIME warranty as well. 
Special Carriers mfg/Clint

 

Ball Joints

Tired of your squeaking heim joints? Here is the CURE!! Special Carriers mfg. ORIGINAL ball joint carriers. These will work on any 1000xp/turbo a arm I have ever made and several other brands of a arms.
Simply thread in and use your choice of ball joint. 
Parts have been fully tested by all my guys running my parts. Tested to the EXTREME.

 

 

"Hill Killer" 1000xp

Upper arm is built from 1.0625"x.250 wall DOM tubing. Sleeved with structural stainless steel rod and gusseted in the bend over the tie rod for added strength.

  Lower arm is built from 1 1/4"X.250 wall for XTREME strength and rigidity. High clearance bends are also leaned outwards to accommodate all brands of axles.

Arms come standard with your choice of QA1 7/8 heim  joints or ball joint carriers and run your choice of ball joints.

Or for XTREME strength upgrade to the FK "no maintenance" Heim joints.